Sovol
SV08
About This Printer
Mid-Range · $400–$550The SV08 is Sovol's flagship CoreXY printer and a rare find: a genuinely open-source CoreXY running Klipper that punches well above its weight class. It uses a tool-board PCB system on the printhead for clean wiring, supports CANBUS, and delivers 700mm/s speeds. It's built for modders and tinkerers who want the flexibility of a Voron-adjacent machine without building from scratch.
What it does well
- Open-source CoreXY with full Klipper support
- 700mm/s top speed with CANBUS toolboard architecture
- Highly modifiable — active community building Voron-style mods
- Good print quality at moderate speeds
- Better build quality than many Chinese budget printers
Limitations to know
- Open-frame design — no enclosure for ABS/ASA
- Requires meaningful calibration to get the best results
- Not beginner-friendly — assumes Klipper comfort
- Support from Sovol is limited compared to Bambu or Prusa
Best For
Ideal Use Case
Klipper-comfortable tinkerers who want a fast, hackable CoreXY without building a Voron from scratch.
Specifications
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 100°C
- Default Nozzle
- 0.4 mm
- Enclosure
- Recommended
- Hotend Type
- all-metal
- Bed Size
- 350x350
- Build Volume
- 350×350×345 mm
- Release Year
- 2024
Filament Settings Profiles(4 profiles)
| Filament | Material | Nozzle ⌀ |
|---|---|---|
| Overture Overture PLA - Black | PLA | 0.4 mm |
| Overture Overture PETG - Black | PETG | 0.4 mm |
| Overture Overture TPU - Black | TPU | 0.4 mm |
| eSun eSun PLA+ - Black | PLA+PLUS | 0.4 mm |
Compatible Filaments(63 filaments)
11 filaments shown
eSun
eSun PETG - Black
Black
230–250°C
eSun
eSun PETG - Clear
Clear
230–250°C
eSun
eSun PETG - Red
Red
230–250°C
eSun
eSun PETG - Silver
Silver
230–250°C
eSun
eSun PETG - Solid White
Solid White
230–250°C
Overture
Overture PETG - Black
Black
230–250°C
Overture
Overture PETG - Blue
Blue
230–250°C
Overture
Overture PETG - Clear
Clear
230–250°C
Overture
Overture PETG - Red
Red
230–250°C
Overture
Overture PETG - White
White
230–250°C
Prusament
Prusament PETG 1.75mm
230–250°C