PLA91% confidence
Best Settings for Overture Overture PLA - Black on Bambu Lab P1P
Nozzle 220°C · Bed 35°C · 200 mm/s
Bambu Lab P1P Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 100°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 256×256×256 mm
- Enclosure
- Recommended
- Release Year
- 2022
Overture Overture PLA - Black Specs
- Material
- PLA
- Nozzle Temp Range
- 190°C – 220°C
- Bed Temp Range
- 25°C – 60°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture PLA — reliable budget PLA with good dimensional accuracy (±0.05mm). Minimal warping, works well without a heated bed. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
91% confidenceSource: Community
Nozzle Temp
220°C
Bed Temp
35°C
Print Speed
200 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 220°C |
| Bed Temperature | 35°C |
| Print Speed | 200 mm/s |
| Retraction Distance | 0.8 mm |
| Retraction Speed | 40 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
Notes
P1P + PLA: Same CoreXY as P1S with no enclosure. PLA prints beautifully at high speeds. No heat creep concern on open-frame.
Where to Buy Overture Overture PLA - Black
Overture
Overture PLA - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Bambu Lab P1P
Overture Overture PLA - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture PLA - Black on the Bambu Lab P1P?
The recommended nozzle temperature is 220°C. This is based on a confidence score of 91%.
What bed temperature should I use for PLA on the Bambu Lab P1P?
Set your bed temperature to 35°C.
What print speed should I use for Overture Overture PLA - Black?
The recommended print speed is 200 mm/s.
Does printing PLA on the Bambu Lab P1P require an enclosure?
No, an enclosure is not strictly required for printing PLA on the Bambu Lab P1P, though it can help in cold environments.
What retraction settings should I use for Overture Overture PLA - Black on the Bambu Lab P1P?
Use a retraction distance of 0.8 mm at 40 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PLA on the Bambu Lab P1P?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.