PLA95% confidence
Best Settings for Overture Overture PLA - Black on Prusa MK4
Nozzle 215°C · Bed 60°C · 100 mm/s
Prusa MK4 Specs
- Max Nozzle Temp
- 290°C
- Max Bed Temp
- 120°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 250×210×220 mm
- Enclosure
- Recommended
- Release Year
- 2023
Overture Overture PLA - Black Specs
- Material
- PLA
- Nozzle Temp Range
- 190°C – 220°C
- Bed Temp Range
- 25°C – 60°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture PLA — reliable budget PLA with good dimensional accuracy (±0.05mm). Minimal warping, works well without a heated bed. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
95% confidenceSource: Manufacturer
Nozzle Temp
215°C
1st: 215°C
Bed Temp
60°C
1st: 60°C
Print Speed
100 mm/s
1st: 20 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 215°C |
| Bed Temperature | 60°C |
| Print Speed | 100 mm/s |
| Retraction Distance | 0.5 mm |
| Retraction Speed | 45 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
Notes
MK4 + PLA: Nextruder handles PLA flawlessly. Use smooth PEI. Live-adjust Z for perfect first layer.
Troubleshooting
First layer adhesion: Clean sheet with IPA. Underextrusion: Check Nextruder tension.
Sources
Source type: Manufacturer
Where to Buy Overture Overture PLA - Black
Overture
Overture PLA - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Prusa MK4
Overture Overture PLA - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture PLA - Black on the Prusa MK4?
The recommended nozzle temperature is 215°C, with a first layer temperature of 215°C. This is based on a confidence score of 95%.
What bed temperature should I use for PLA on the Prusa MK4?
Set your bed temperature to 60°C, with 60°C for the first layer.
What print speed should I use for Overture Overture PLA - Black?
The recommended print speed is 100 mm/s, with a slower first layer speed of 20 mm/s.
Does printing PLA on the Prusa MK4 require an enclosure?
No, an enclosure is not strictly required for printing PLA on the Prusa MK4, though it can help in cold environments.
What retraction settings should I use for Overture Overture PLA - Black on the Prusa MK4?
Use a retraction distance of 0.5 mm at 45 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PLA on the Prusa MK4?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.