PLA_PLUS90% confidence
Best Settings for eSun eSun PLA+ - Black on Bambu Lab X1 Carbon
Nozzle 220°C · Bed 60°C · 220 mm/s
Bambu Lab X1 Carbon Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 100°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 256×256×256 mm
- Enclosure
- Enclosed
- Release Year
- 2022
eSun eSun PLA+ - Black Specs
- Material
- PLA_PLUS
- Nozzle Temp Range
- 205°C – 225°C
- Bed Temp Range
- 60°C – 80°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
eSun PLA+ (PLA Pro) — enhanced PLA with better toughness and layer adhesion than standard PLA. Less brittle, slightly higher print temps. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
90% confidenceSource: Community
Nozzle Temp
220°C
1st: 225°C
Bed Temp
60°C
1st: 65°C
Print Speed
220 mm/s
1st: 50 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 220°C |
| Bed Temperature | 60°C |
| Print Speed | 220 mm/s |
| Retraction Distance | 0.8 mm |
| Retraction Speed | 40 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
Notes
X1C + PLA+: Slightly hotter than standard PLA. eSun PLA+ runs well at 220°C. 60°C bed improves first layer adhesion vs standard PLA settings.
Where to Buy eSun eSun PLA+ - Black
eSun
eSun PLA+ - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Bambu Lab X1 Carbon
eSun eSun PLA+ - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for eSun eSun PLA+ - Black on the Bambu Lab X1 Carbon?
The recommended nozzle temperature is 220°C, with a first layer temperature of 225°C. This is based on a confidence score of 90%.
What bed temperature should I use for PLA_PLUS on the Bambu Lab X1 Carbon?
Set your bed temperature to 60°C, with 65°C for the first layer.
What print speed should I use for eSun eSun PLA+ - Black?
The recommended print speed is 220 mm/s, with a slower first layer speed of 50 mm/s.
Does printing PLA_PLUS on the Bambu Lab X1 Carbon require an enclosure?
No, an enclosure is not strictly required for printing PLA_PLUS on the Bambu Lab X1 Carbon, though it can help in cold environments.
What retraction settings should I use for eSun eSun PLA+ - Black on the Bambu Lab X1 Carbon?
Use a retraction distance of 0.8 mm at 40 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PLA_PLUS on the Bambu Lab X1 Carbon?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.