PETG92% confidence
Best Settings for Prusament Prusament PETG 1.75mm on Bambu Lab X1 Carbon
Nozzle 240°C · Bed 80°C · 180 mm/s
Bambu Lab X1 Carbon Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 100°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 256×256×256 mm
- Enclosure
- Enclosed
- Release Year
- 2022
Prusament Prusament PETG 1.75mm Specs
- Material
- PETG
- Nozzle Temp Range
- 230°C – 250°C
- Bed Temp Range
- 70°C – 90°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
High-quality PETG with tight tolerances. Excellent layer adhesion, chemical resistance, and durability. Great for functional parts that need more strength than PLA.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
92% confidenceSource: Lab Tested
Nozzle Temp
240°C
1st: 245°C
Bed Temp
80°C
1st: 80°C
Print Speed
180 mm/s
1st: 40 mm/s
Fan Speed
40%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 240°C |
| Bed Temperature | 80°C |
| Print Speed | 180 mm/s |
| Retraction Distance | 1 mm |
| Retraction Speed | 40 mm/s |
| Fan Speed | 40% |
| Enclosure | Optional |
Notes
X1C + Prusament PETG: Same as P1S but can push 180mm/s. Use textured PEI. 40% fan max to maintain layer adhesion.
Sources
Source type: Lab Tested
Where to Buy Prusament Prusament PETG 1.75mm
Prusament
Prusament PETG 1.75mm
Check price on PrusaBuy on Prusa
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Bambu Lab X1 Carbon
Prusament Prusament PETG 1.75mm on other printers
Frequently Asked Questions
What nozzle temperature should I use for Prusament Prusament PETG 1.75mm on the Bambu Lab X1 Carbon?
The recommended nozzle temperature is 240°C, with a first layer temperature of 245°C. This is based on a confidence score of 92%.
What bed temperature should I use for PETG on the Bambu Lab X1 Carbon?
Set your bed temperature to 80°C, with 80°C for the first layer.
What print speed should I use for Prusament Prusament PETG 1.75mm?
The recommended print speed is 180 mm/s, with a slower first layer speed of 40 mm/s.
Does printing PETG on the Bambu Lab X1 Carbon require an enclosure?
No, an enclosure is not strictly required for printing PETG on the Bambu Lab X1 Carbon, though it can help in cold environments.
What retraction settings should I use for Prusament Prusament PETG 1.75mm on the Bambu Lab X1 Carbon?
Use a retraction distance of 1 mm at 40 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PETG on the Bambu Lab X1 Carbon?
Set your part cooling fan to 40%. Adjust lower for materials like ABS or ASA to reduce warping.