PETG85% confidence
Best Settings for Prusament Prusament PETG 1.75mm on Creality Ender 3 V3
Nozzle 240°C · Bed 80°C · 100 mm/s
Creality Ender 3 V3 Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 100°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 220×220×250 mm
- Enclosure
- Recommended
- Release Year
- 2023
Prusament Prusament PETG 1.75mm Specs
- Material
- PETG
- Nozzle Temp Range
- 230°C – 250°C
- Bed Temp Range
- 70°C – 90°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
High-quality PETG with tight tolerances. Excellent layer adhesion, chemical resistance, and durability. Great for functional parts that need more strength than PLA.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
85% confidenceSource: Community
Nozzle Temp
240°C
1st: 245°C
Bed Temp
80°C
1st: 80°C
Print Speed
100 mm/s
1st: 25 mm/s
Fan Speed
40%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 240°C |
| Bed Temperature | 80°C |
| Print Speed | 100 mm/s |
| Retraction Distance | 1 mm |
| Retraction Speed | 40 mm/s |
| Fan Speed | 40% |
| Enclosure | Optional |
Notes
Ender 3 V3 + Prusament PETG: Direct drive handles PETG well. 240°C, 80°C bed, 40% fan. Slower speeds (100mm/s) for best quality.
Where to Buy Prusament Prusament PETG 1.75mm
Prusament
Prusament PETG 1.75mm
Check price on PrusaBuy on Prusa
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Creality Ender 3 V3
Prusament Prusament PETG 1.75mm on other printers
Frequently Asked Questions
What nozzle temperature should I use for Prusament Prusament PETG 1.75mm on the Creality Ender 3 V3?
The recommended nozzle temperature is 240°C, with a first layer temperature of 245°C. This is based on a confidence score of 85%.
What bed temperature should I use for PETG on the Creality Ender 3 V3?
Set your bed temperature to 80°C, with 80°C for the first layer.
What print speed should I use for Prusament Prusament PETG 1.75mm?
The recommended print speed is 100 mm/s, with a slower first layer speed of 25 mm/s.
Does printing PETG on the Creality Ender 3 V3 require an enclosure?
No, an enclosure is not strictly required for printing PETG on the Creality Ender 3 V3, though it can help in cold environments.
What retraction settings should I use for Prusament Prusament PETG 1.75mm on the Creality Ender 3 V3?
Use a retraction distance of 1 mm at 40 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PETG on the Creality Ender 3 V3?
Set your part cooling fan to 40%. Adjust lower for materials like ABS or ASA to reduce warping.