PETG93% confidence
Best Settings for Prusament Prusament PETG 1.75mm on Prusa Mini+
Nozzle 240°C · Bed 85°C · 60 mm/s
Prusa Mini+ Specs
- Max Nozzle Temp
- 280°C
- Max Bed Temp
- 100°C
- Hotend Type
- PTFE-lined
- Default Nozzle
- 0.4 mm
- Build Volume
- 180×180×180 mm
- Enclosure
- Open frame
- Release Year
- 2021
Prusament Prusament PETG 1.75mm Specs
- Material
- PETG
- Nozzle Temp Range
- 230°C – 250°C
- Bed Temp Range
- 70°C – 90°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
High-quality PETG with tight tolerances. Excellent layer adhesion, chemical resistance, and durability. Great for functional parts that need more strength than PLA.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
93% confidenceSource: Manufacturer
Nozzle Temp
240°C
1st: 245°C
Bed Temp
85°C
1st: 85°C
Print Speed
60 mm/s
1st: 20 mm/s
Fan Speed
30%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 240°C |
| Bed Temperature | 85°C |
| Print Speed | 60 mm/s |
| Retraction Distance | 3.5 mm |
| Retraction Speed | 35 mm/s |
| Fan Speed | 30% |
| Enclosure | Optional |
Notes
Mini+ + Prusament PETG: Bowden needs 3.5mm retraction for PETG. 240°C, 85°C bed. Built-in profile works. Use textured PEI.
Sources
Source type: Manufacturer
Where to Buy Prusament Prusament PETG 1.75mm
Prusament
Prusament PETG 1.75mm
Check price on PrusaBuy on Prusa
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Prusa Mini+
Prusament Prusament PETG 1.75mm on other printers
Frequently Asked Questions
What nozzle temperature should I use for Prusament Prusament PETG 1.75mm on the Prusa Mini+?
The recommended nozzle temperature is 240°C, with a first layer temperature of 245°C. This is based on a confidence score of 93%.
What bed temperature should I use for PETG on the Prusa Mini+?
Set your bed temperature to 85°C, with 85°C for the first layer.
What print speed should I use for Prusament Prusament PETG 1.75mm?
The recommended print speed is 60 mm/s, with a slower first layer speed of 20 mm/s.
Does printing PETG on the Prusa Mini+ require an enclosure?
No, an enclosure is not strictly required for printing PETG on the Prusa Mini+, though it can help in cold environments.
What retraction settings should I use for Prusament Prusament PETG 1.75mm on the Prusa Mini+?
Use a retraction distance of 3.5 mm at 35 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PETG on the Prusa Mini+?
Set your part cooling fan to 30%. Adjust lower for materials like ABS or ASA to reduce warping.