ASA80% confidence
Best Settings for Prusament Prusament ASA 1.75mm on Elegoo Neptune 4
Nozzle 250°C · Bed 105°C · 100 mm/s
Elegoo Neptune 4 Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 110°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 225×225×265 mm
- Enclosure
- Recommended
- Release Year
- 2023
Prusament Prusament ASA 1.75mm Specs
- Material
- ASA
- Nozzle Temp Range
- 240°C – 260°C
- Bed Temp Range
- 90°C – 110°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
UV-resistant ASA for outdoor applications. Excellent weathering resistance and mechanical properties similar to ABS. Enclosure strongly recommended.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
80% confidenceSource: CommunityEnclosure RequiredDry Filament First
Nozzle Temp
250°C
1st: 255°C
Bed Temp
105°C
1st: 105°C
Print Speed
100 mm/s
1st: 30 mm/s
Fan Speed
5%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 250°C |
| Bed Temperature | 105°C |
| Print Speed | 100 mm/s |
| Retraction Distance | 0.8 mm |
| Retraction Speed | 35 mm/s |
| Fan Speed | 5% |
| Enclosure | Required |
| Filament Drying | Yes — 80°C for 4h |
Dry your filament before printing: 80°C for 4 hours. Moisture causes popping, stringing, and poor layer adhesion.
Notes
Neptune 4 + Prusament ASA: Needs enclosure. 250°C, 105°C bed, minimal fan. Klipper pressure advance helps with ASA corners.
Where to Buy Prusament Prusament ASA 1.75mm
Prusament
Prusament ASA 1.75mm
Check price on PrusaBuy on Prusa
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Elegoo Neptune 4
Prusament Prusament ASA 1.75mm on other printers
Frequently Asked Questions
What nozzle temperature should I use for Prusament Prusament ASA 1.75mm on the Elegoo Neptune 4?
The recommended nozzle temperature is 250°C, with a first layer temperature of 255°C. This is based on a confidence score of 80%.
What bed temperature should I use for ASA on the Elegoo Neptune 4?
Set your bed temperature to 105°C, with 105°C for the first layer.
What print speed should I use for Prusament Prusament ASA 1.75mm?
The recommended print speed is 100 mm/s, with a slower first layer speed of 30 mm/s.
Does printing ASA on the Elegoo Neptune 4 require an enclosure?
Yes, an enclosure is required when printing ASA on the Elegoo Neptune 4 to prevent warping.
Do I need to dry Prusament Prusament ASA 1.75mm before printing?
Yes, dry this filament at 80°C for 4 hours before printing. Moisture causes stringing, popping, and poor layer adhesion.
What retraction settings should I use for Prusament Prusament ASA 1.75mm on the Elegoo Neptune 4?
Use a retraction distance of 0.8 mm at 35 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for ASA on the Elegoo Neptune 4?
Set your part cooling fan to 5%. Adjust lower for materials like ABS or ASA to reduce warping.