PLA87% confidence
Best Settings for Prusament Prusament PLA 1.75mm on Elegoo Neptune 4
Nozzle 215°C · Bed 55°C · 250 mm/s
Elegoo Neptune 4 Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 110°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 225×225×265 mm
- Enclosure
- Recommended
- Release Year
- 2023
Prusament Prusament PLA 1.75mm Specs
- Material
- PLA
- Nozzle Temp Range
- 200°C – 220°C
- Bed Temp Range
- 40°C – 60°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
Premium PLA with industry-leading ±0.02mm diameter tolerance. Consistent quality, excellent surface finish, and reliable prints every time. Made in-house by Prusa Research.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
87% confidenceSource: Community
Nozzle Temp
215°C
1st: 220°C
Bed Temp
55°C
1st: 55°C
Print Speed
250 mm/s
1st: 40 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 215°C |
| Bed Temperature | 55°C |
| Print Speed | 250 mm/s |
| Retraction Distance | 0.8 mm |
| Retraction Speed | 40 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
Notes
Neptune 4 + Prusament PLA: Klipper firmware handles high speeds well. Prusament PLA at 215°C with pressure advance enabled. Full fan speed.
Where to Buy Prusament Prusament PLA 1.75mm
Prusament
Prusament PLA 1.75mm
Check price on PrusaBuy on Prusa
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Elegoo Neptune 4
Prusament Prusament PLA 1.75mm on other printers
Frequently Asked Questions
What nozzle temperature should I use for Prusament Prusament PLA 1.75mm on the Elegoo Neptune 4?
The recommended nozzle temperature is 215°C, with a first layer temperature of 220°C. This is based on a confidence score of 87%.
What bed temperature should I use for PLA on the Elegoo Neptune 4?
Set your bed temperature to 55°C, with 55°C for the first layer.
What print speed should I use for Prusament Prusament PLA 1.75mm?
The recommended print speed is 250 mm/s, with a slower first layer speed of 40 mm/s.
Does printing PLA on the Elegoo Neptune 4 require an enclosure?
No, an enclosure is not strictly required for printing PLA on the Elegoo Neptune 4, though it can help in cold environments.
What retraction settings should I use for Prusament Prusament PLA 1.75mm on the Elegoo Neptune 4?
Use a retraction distance of 0.8 mm at 40 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PLA on the Elegoo Neptune 4?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.