PETG90% confidence
Best Settings for Overture Overture PETG - Black on Prusa MK4
Nozzle 240°C · Bed 85°C · 70 mm/s
Prusa MK4 Specs
- Max Nozzle Temp
- 290°C
- Max Bed Temp
- 120°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 250×210×220 mm
- Enclosure
- Recommended
- Release Year
- 2023
Overture Overture PETG - Black Specs
- Material
- PETG
- Nozzle Temp Range
- 230°C – 250°C
- Bed Temp Range
- 70°C – 80°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture PETG — tough and chemical-resistant with good layer adhesion. Dimensional accuracy ±0.05mm. Works well on textured PEI. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
90% confidenceSource: Manufacturer
Nozzle Temp
240°C
Bed Temp
85°C
Print Speed
70 mm/s
Fan Speed
30%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 240°C |
| Bed Temperature | 85°C |
| Print Speed | 70 mm/s |
| Retraction Distance | 0.4 mm |
| Retraction Speed | 45 mm/s |
| Fan Speed | 30% |
| Enclosure | Optional |
Notes
MK4 + PETG: Use satin or smooth PEI. Fan at 30%. PETG can over-bond to smooth PEI — use satin sheet.
Troubleshooting
Stringing: Lower to 235°C, retract 0.6mm. Over-adhesion: Switch to satin sheet.
Sources
Source type: Manufacturer
Where to Buy Overture Overture PETG - Black
Overture
Overture PETG - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Prusa MK4
Overture Overture PETG - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture PETG - Black on the Prusa MK4?
The recommended nozzle temperature is 240°C. This is based on a confidence score of 90%.
What bed temperature should I use for PETG on the Prusa MK4?
Set your bed temperature to 85°C.
What print speed should I use for Overture Overture PETG - Black?
The recommended print speed is 70 mm/s.
Does printing PETG on the Prusa MK4 require an enclosure?
No, an enclosure is not strictly required for printing PETG on the Prusa MK4, though it can help in cold environments.
What retraction settings should I use for Overture Overture PETG - Black on the Prusa MK4?
Use a retraction distance of 0.4 mm at 45 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PETG on the Prusa MK4?
Set your part cooling fan to 30%. Adjust lower for materials like ABS or ASA to reduce warping.