Anycubic
Kobra 2 Pro
About This Printer
Budget-Friendly · $200–$280The Kobra 2 Pro steps up from the base Kobra 2 with a higher top speed of 500mm/s, an improved direct-drive extruder setup, and a sturdier frame. It retains the beginner-friendly auto-leveling and simple interface while delivering noticeably faster prints for users who are ready to push beyond entry-level performance.
What it does well
- 500mm/s is fast for a budget bed-slinger
- Better extruder and motor performance over base Kobra 2
- Auto-leveling with good default calibration profiles
- Solid value for a fast beginner printer
Limitations to know
- PTFE hotend still limits material range to ~230°C
- Bed ringing at top speeds requires tuning to minimize
- Smaller ecosystem and community than Creality equivalents
Best For
Ideal Use Case
Beginners ready to move past the cheapest printers, or intermediate users wanting fast PLA/PETG printing on a budget.
Specifications
- Max Nozzle Temp
- 260°C
- Max Bed Temp
- 110°C
- Default Nozzle
- 0.4 mm
- Enclosure
- Recommended
- Hotend Type
- PTFE-lined
- Bed Size
- 250x220
- Build Volume
- 250×220×220 mm
- Release Year
- 2023
Filament Settings Profiles(4 profiles)
| Filament | Material | Nozzle ⌀ |
|---|---|---|
| Overture Overture PLA - Black | PLA | 0.4 mm |
| Overture Overture PETG - Black | PETG | 0.4 mm |
| Overture Overture TPU - Black | TPU | 0.4 mm |
| eSun eSun PLA+ - Black | PLA+PLUS | 0.4 mm |
Compatible Filaments(63 filaments)
11 filaments shown
eSun
eSun PETG - Black
Black
230–250°C
eSun
eSun PETG - Clear
Clear
230–250°C
eSun
eSun PETG - Red
Red
230–250°C
eSun
eSun PETG - Silver
Silver
230–250°C
eSun
eSun PETG - Solid White
Solid White
230–250°C
Overture
Overture PETG - Black
Black
230–250°C
Overture
Overture PETG - Blue
Blue
230–250°C
Overture
Overture PETG - Clear
Clear
230–250°C
Overture
Overture PETG - Red
Red
230–250°C
Overture
Overture PETG - White
White
230–250°C
Prusament
Prusament PETG 1.75mm
230–250°C