PLA82% confidence
Best Settings for Overture Overture PLA - Black on Anycubic Kobra 2 Pro
Nozzle 210°C · Bed 55°C · 200 mm/s
Anycubic Kobra 2 Pro Specs
- Max Nozzle Temp
- 260°C
- Max Bed Temp
- 110°C
- Hotend Type
- PTFE-lined
- Default Nozzle
- 0.4 mm
- Build Volume
- 250×220×220 mm
- Enclosure
- Recommended
- Release Year
- 2023
Overture Overture PLA - Black Specs
- Material
- PLA
- Nozzle Temp Range
- 190°C – 220°C
- Bed Temp Range
- 25°C – 60°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture PLA — reliable budget PLA with good dimensional accuracy (±0.05mm). Minimal warping, works well without a heated bed. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
82% confidenceSource: Community
Nozzle Temp
210°C
Bed Temp
55°C
Print Speed
200 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 210°C |
| Bed Temperature | 55°C |
| Print Speed | 200 mm/s |
| Retraction Distance | 4.5 mm |
| Retraction Speed | 45 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
Notes
Kobra 2 Pro + PLA: Faster motor than Kobra 2, but still PTFE Bowden. High retraction needed. Up to 500 mm/s target but 200 mm/s is reliable.
Where to Buy Overture Overture PLA - Black
Overture
Overture PLA - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Anycubic Kobra 2 Pro
Overture Overture PLA - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture PLA - Black on the Anycubic Kobra 2 Pro?
The recommended nozzle temperature is 210°C. This is based on a confidence score of 82%.
What bed temperature should I use for PLA on the Anycubic Kobra 2 Pro?
Set your bed temperature to 55°C.
What print speed should I use for Overture Overture PLA - Black?
The recommended print speed is 200 mm/s.
Does printing PLA on the Anycubic Kobra 2 Pro require an enclosure?
No, an enclosure is not strictly required for printing PLA on the Anycubic Kobra 2 Pro, though it can help in cold environments.
What retraction settings should I use for Overture Overture PLA - Black on the Anycubic Kobra 2 Pro?
Use a retraction distance of 4.5 mm at 45 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PLA on the Anycubic Kobra 2 Pro?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.