TPU60% confidence
Best Settings for Overture Overture TPU - Black on Anycubic Kobra 2 Pro
Nozzle 225°C · Bed 40°C · 20 mm/s
Anycubic Kobra 2 Pro Specs
- Max Nozzle Temp
- 260°C
- Max Bed Temp
- 110°C
- Hotend Type
- PTFE-lined
- Default Nozzle
- 0.4 mm
- Build Volume
- 250×220×220 mm
- Enclosure
- Recommended
- Release Year
- 2023
Overture Overture TPU - Black Specs
- Material
- TPU
- Nozzle Temp Range
- 210°C – 230°C
- Bed Temp Range
- 30°C – 60°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture TPU 95A — flexible filament for rubber-like parts. Shore 95A hardness. Best with direct-drive extruders at slow speeds (20–30mm/s). 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
60% confidenceSource: CommunityDry Filament First
Nozzle Temp
225°C
Bed Temp
40°C
Print Speed
20 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 225°C |
| Bed Temperature | 40°C |
| Print Speed | 20 mm/s |
| Retraction Distance | 0 mm |
| Retraction Speed | 30 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
| Filament Drying | Yes — 50°C for 6h |
Dry your filament before printing: 50°C for 6 hours. Moisture causes popping, stringing, and poor layer adhesion.
Notes
Kobra 2 Pro + TPU: PTFE Bowden + TPU is hard. Disable retraction, print very slowly. Use 95A TPU only.
Where to Buy Overture Overture TPU - Black
Overture
Overture TPU - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Anycubic Kobra 2 Pro
Overture Overture TPU - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture TPU - Black on the Anycubic Kobra 2 Pro?
The recommended nozzle temperature is 225°C. This is based on a confidence score of 60%.
What bed temperature should I use for TPU on the Anycubic Kobra 2 Pro?
Set your bed temperature to 40°C.
What print speed should I use for Overture Overture TPU - Black?
The recommended print speed is 20 mm/s.
Does printing TPU on the Anycubic Kobra 2 Pro require an enclosure?
No, an enclosure is not strictly required for printing TPU on the Anycubic Kobra 2 Pro, though it can help in cold environments.
Do I need to dry Overture Overture TPU - Black before printing?
Yes, dry this filament at 50°C for 6 hours before printing. Moisture causes stringing, popping, and poor layer adhesion.
What retraction settings should I use for Overture Overture TPU - Black on the Anycubic Kobra 2 Pro?
Use a retraction distance of 0 mm at 30 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for TPU on the Anycubic Kobra 2 Pro?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.