PLA_PLUS78% confidence
Best Settings for eSun eSun PLA+ - Black on Anycubic Kobra 2
Nozzle 215°C · Bed 60°C · 100 mm/s
Anycubic Kobra 2 Specs
- Max Nozzle Temp
- 260°C
- Max Bed Temp
- 90°C
- Hotend Type
- PTFE-lined
- Default Nozzle
- 0.4 mm
- Build Volume
- 220×220×250 mm
- Enclosure
- Open frame
- Release Year
- 2023
eSun eSun PLA+ - Black Specs
- Material
- PLA_PLUS
- Nozzle Temp Range
- 205°C – 225°C
- Bed Temp Range
- 60°C – 80°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
eSun PLA+ (PLA Pro) — enhanced PLA with better toughness and layer adhesion than standard PLA. Less brittle, slightly higher print temps. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
78% confidenceSource: Community
Nozzle Temp
215°C
Bed Temp
60°C
Print Speed
100 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 215°C |
| Bed Temperature | 60°C |
| Print Speed | 100 mm/s |
| Retraction Distance | 5 mm |
| Retraction Speed | 45 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
Notes
Kobra 2 + PLA+: 260°C hotend is within PLA+ range. Bowden retraction 5mm. Slightly slower than PLA.
Where to Buy eSun eSun PLA+ - Black
eSun
eSun PLA+ - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Anycubic Kobra 2
eSun eSun PLA+ - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for eSun eSun PLA+ - Black on the Anycubic Kobra 2?
The recommended nozzle temperature is 215°C. This is based on a confidence score of 78%.
What bed temperature should I use for PLA_PLUS on the Anycubic Kobra 2?
Set your bed temperature to 60°C.
What print speed should I use for eSun eSun PLA+ - Black?
The recommended print speed is 100 mm/s.
Does printing PLA_PLUS on the Anycubic Kobra 2 require an enclosure?
No, an enclosure is not strictly required for printing PLA_PLUS on the Anycubic Kobra 2, though it can help in cold environments.
What retraction settings should I use for eSun eSun PLA+ - Black on the Anycubic Kobra 2?
Use a retraction distance of 5 mm at 45 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PLA_PLUS on the Anycubic Kobra 2?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.