PETG82% confidence
Best Settings for Overture Overture PETG - Black on Bambu Lab A1 Mini
Nozzle 235°C · Bed 70°C · 80 mm/s
Bambu Lab A1 Mini Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 80°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 180×180×180 mm
- Enclosure
- Open frame
- Release Year
- 2023
Overture Overture PETG - Black Specs
- Material
- PETG
- Nozzle Temp Range
- 230°C – 250°C
- Bed Temp Range
- 70°C – 80°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture PETG — tough and chemical-resistant with good layer adhesion. Dimensional accuracy ±0.05mm. Works well on textured PEI. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
82% confidenceSource: Community
Nozzle Temp
235°C
Bed Temp
70°C
Print Speed
80 mm/s
Fan Speed
50%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 235°C |
| Bed Temperature | 70°C |
| Print Speed | 80 mm/s |
| Retraction Distance | 1 mm |
| Retraction Speed | 35 mm/s |
| Fan Speed | 50% |
| Enclosure | Optional |
Notes
A1 Mini + PETG: 80°C max bed limits PETG bed temp; run at 70°C. Lower speed for quality. Fan 50%.
Troubleshooting
Poor adhesion: Bed capped at 80°C — use PEI with glue stick. Stringing: Lower temp to 230°C.
Where to Buy Overture Overture PETG - Black
Overture
Overture PETG - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Bambu Lab A1 Mini
Overture Overture PETG - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture PETG - Black on the Bambu Lab A1 Mini?
The recommended nozzle temperature is 235°C. This is based on a confidence score of 82%.
What bed temperature should I use for PETG on the Bambu Lab A1 Mini?
Set your bed temperature to 70°C.
What print speed should I use for Overture Overture PETG - Black?
The recommended print speed is 80 mm/s.
Does printing PETG on the Bambu Lab A1 Mini require an enclosure?
No, an enclosure is not strictly required for printing PETG on the Bambu Lab A1 Mini, though it can help in cold environments.
What retraction settings should I use for Overture Overture PETG - Black on the Bambu Lab A1 Mini?
Use a retraction distance of 1 mm at 35 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PETG on the Bambu Lab A1 Mini?
Set your part cooling fan to 50%. Adjust lower for materials like ABS or ASA to reduce warping.