PETG90% confidence
Best Settings for Overture Overture PETG - Black on Bambu Lab P1S
Nozzle 240°C · Bed 80°C · 150 mm/s
Bambu Lab P1S Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 100°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 256×256×256 mm
- Enclosure
- Enclosed
- Release Year
- 2023
Overture Overture PETG - Black Specs
- Material
- PETG
- Nozzle Temp Range
- 230°C – 250°C
- Bed Temp Range
- 70°C – 80°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture PETG — tough and chemical-resistant with good layer adhesion. Dimensional accuracy ±0.05mm. Works well on textured PEI. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
90% confidenceSource: Lab Tested
Nozzle Temp
240°C
Bed Temp
80°C
Print Speed
150 mm/s
Fan Speed
50%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 240°C |
| Bed Temperature | 80°C |
| Print Speed | 150 mm/s |
| Retraction Distance | 1 mm |
| Retraction Speed | 40 mm/s |
| Fan Speed | 50% |
| Enclosure | Optional |
Notes
P1S + PETG: Use smooth PEI or textured PEI with caution. Reduce speed vs PLA to minimize stringing. Fan at 50% balances cooling and layer bonding.
Troubleshooting
Stringing: Lower to 235°C, retract 1.2mm. Bed adhesion: Clean PEI; use glue stick as release agent to prevent over-bonding.
Sources
Source type: Lab Tested
Where to Buy Overture Overture PETG - Black
Overture
Overture PETG - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Bambu Lab P1S
Overture Overture PETG - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture PETG - Black on the Bambu Lab P1S?
The recommended nozzle temperature is 240°C. This is based on a confidence score of 90%.
What bed temperature should I use for PETG on the Bambu Lab P1S?
Set your bed temperature to 80°C.
What print speed should I use for Overture Overture PETG - Black?
The recommended print speed is 150 mm/s.
Does printing PETG on the Bambu Lab P1S require an enclosure?
No, an enclosure is not strictly required for printing PETG on the Bambu Lab P1S, though it can help in cold environments.
What retraction settings should I use for Overture Overture PETG - Black on the Bambu Lab P1S?
Use a retraction distance of 1 mm at 40 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PETG on the Bambu Lab P1S?
Set your part cooling fan to 50%. Adjust lower for materials like ABS or ASA to reduce warping.