PETG90% confidence
Best Settings for Overture Overture PETG - Black on Prusa MK4S
Nozzle 240°C · Bed 85°C · 80 mm/s
Prusa MK4S Specs
- Max Nozzle Temp
- 290°C
- Max Bed Temp
- 120°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 250×210×220 mm
- Enclosure
- Recommended
- Release Year
- 2024
Overture Overture PETG - Black Specs
- Material
- PETG
- Nozzle Temp Range
- 230°C – 250°C
- Bed Temp Range
- 70°C – 80°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture PETG — tough and chemical-resistant with good layer adhesion. Dimensional accuracy ±0.05mm. Works well on textured PEI. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
90% confidenceSource: Manufacturer
Nozzle Temp
240°C
Bed Temp
85°C
Print Speed
80 mm/s
Fan Speed
30%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 240°C |
| Bed Temperature | 85°C |
| Print Speed | 80 mm/s |
| Retraction Distance | 0.4 mm |
| Retraction Speed | 45 mm/s |
| Fan Speed | 30% |
| Enclosure | Optional |
Notes
MK4S + PETG: Same guidance as MK4. Satin PEI sheet recommended to prevent over-adhesion.
Sources
Source type: Manufacturer
Where to Buy Overture Overture PETG - Black
Overture
Overture PETG - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Prusa MK4S
Overture Overture PETG - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture PETG - Black on the Prusa MK4S?
The recommended nozzle temperature is 240°C. This is based on a confidence score of 90%.
What bed temperature should I use for PETG on the Prusa MK4S?
Set your bed temperature to 85°C.
What print speed should I use for Overture Overture PETG - Black?
The recommended print speed is 80 mm/s.
Does printing PETG on the Prusa MK4S require an enclosure?
No, an enclosure is not strictly required for printing PETG on the Prusa MK4S, though it can help in cold environments.
What retraction settings should I use for Overture Overture PETG - Black on the Prusa MK4S?
Use a retraction distance of 0.4 mm at 45 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PETG on the Prusa MK4S?
Set your part cooling fan to 30%. Adjust lower for materials like ABS or ASA to reduce warping.