PETG85% confidence
Best Settings for Overture Overture PETG - Black on Bambu Lab A1
Nozzle 240°C · Bed 80°C · 120 mm/s
Bambu Lab A1 Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 100°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 256×256×256 mm
- Enclosure
- Recommended
- Release Year
- 2023
Overture Overture PETG - Black Specs
- Material
- PETG
- Nozzle Temp Range
- 230°C – 250°C
- Bed Temp Range
- 70°C – 80°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture PETG — tough and chemical-resistant with good layer adhesion. Dimensional accuracy ±0.05mm. Works well on textured PEI. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
85% confidenceSource: Community
Nozzle Temp
240°C
Bed Temp
80°C
Print Speed
120 mm/s
Fan Speed
50%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 240°C |
| Bed Temperature | 80°C |
| Print Speed | 120 mm/s |
| Retraction Distance | 1 mm |
| Retraction Speed | 40 mm/s |
| Fan Speed | 50% |
| Enclosure | Optional |
Notes
A1 + PETG: 100°C max bed is sufficient for PETG. Use smooth PEI or glue stick on textured.
Where to Buy Overture Overture PETG - Black
Overture
Overture PETG - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Bambu Lab A1
Overture Overture PETG - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture PETG - Black on the Bambu Lab A1?
The recommended nozzle temperature is 240°C. This is based on a confidence score of 85%.
What bed temperature should I use for PETG on the Bambu Lab A1?
Set your bed temperature to 80°C.
What print speed should I use for Overture Overture PETG - Black?
The recommended print speed is 120 mm/s.
Does printing PETG on the Bambu Lab A1 require an enclosure?
No, an enclosure is not strictly required for printing PETG on the Bambu Lab A1, though it can help in cold environments.
What retraction settings should I use for Overture Overture PETG - Black on the Bambu Lab A1?
Use a retraction distance of 1 mm at 40 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PETG on the Bambu Lab A1?
Set your part cooling fan to 50%. Adjust lower for materials like ABS or ASA to reduce warping.