PC85% confidence
Best Settings for Prusament Prusament PC Blend 1.75mm on Bambu Lab P1S
Nozzle 265°C · Bed 110°C · 80 mm/s
Bambu Lab P1S Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 100°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 256×256×256 mm
- Enclosure
- Enclosed
- Release Year
- 2023
Prusament Prusament PC Blend 1.75mm Specs
- Material
- PC
- Nozzle Temp Range
- 250°C – 275°C
- Bed Temp Range
- 100°C – 115°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
Polycarbonate blend offering extreme heat resistance and impact strength. One of the strongest FDM materials available. Requires enclosed printer with all-metal hotend.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
85% confidenceSource: Lab TestedEnclosure RequiredDry Filament First
Nozzle Temp
265°C
1st: 270°C
Bed Temp
110°C
1st: 115°C
Print Speed
80 mm/s
1st: 25 mm/s
Fan Speed
0%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 265°C |
| Bed Temperature | 110°C |
| Print Speed | 80 mm/s |
| Retraction Distance | 0.8 mm |
| Retraction Speed | 35 mm/s |
| Fan Speed | 0% |
| Enclosure | Required |
| Filament Drying | Yes — 90°C for 6h |
Dry your filament before printing: 90°C for 6 hours. Moisture causes popping, stringing, and poor layer adhesion.
Notes
P1S + Prusament PC Blend: Demanding material. 265°C nozzle, 110°C bed, 0% fan, enclosure closed. P1S all-metal hotend handles it. Hardened nozzle recommended. Dry thoroughly before printing.
Sources
Source type: Lab Tested
Where to Buy Prusament Prusament PC Blend 1.75mm
Prusament
Prusament PC Blend 1.75mm
Check price on PrusaBuy on Prusa
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Bambu Lab P1S
Prusament Prusament PC Blend 1.75mm on other printers
Frequently Asked Questions
What nozzle temperature should I use for Prusament Prusament PC Blend 1.75mm on the Bambu Lab P1S?
The recommended nozzle temperature is 265°C, with a first layer temperature of 270°C. This is based on a confidence score of 85%.
What bed temperature should I use for PC on the Bambu Lab P1S?
Set your bed temperature to 110°C, with 115°C for the first layer.
What print speed should I use for Prusament Prusament PC Blend 1.75mm?
The recommended print speed is 80 mm/s, with a slower first layer speed of 25 mm/s.
Does printing PC on the Bambu Lab P1S require an enclosure?
Yes, an enclosure is required when printing PC on the Bambu Lab P1S to prevent warping.
Do I need to dry Prusament Prusament PC Blend 1.75mm before printing?
Yes, dry this filament at 90°C for 6 hours before printing. Moisture causes stringing, popping, and poor layer adhesion.
What retraction settings should I use for Prusament Prusament PC Blend 1.75mm on the Bambu Lab P1S?
Use a retraction distance of 0.8 mm at 35 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PC on the Bambu Lab P1S?
Set your part cooling fan to 0%. Adjust lower for materials like ABS or ASA to reduce warping.