PLA95% confidence
Best Settings for Prusament Prusament PLA 1.75mm on Bambu Lab P1S
Nozzle 215°C · Bed 55°C · 200 mm/s
Bambu Lab P1S Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 100°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 256×256×256 mm
- Enclosure
- Enclosed
- Release Year
- 2023
Prusament Prusament PLA 1.75mm Specs
- Material
- PLA
- Nozzle Temp Range
- 200°C – 220°C
- Bed Temp Range
- 40°C – 60°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
Premium PLA with industry-leading ±0.02mm diameter tolerance. Consistent quality, excellent surface finish, and reliable prints every time. Made in-house by Prusa Research.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
95% confidenceSource: Lab Tested
Nozzle Temp
215°C
1st: 220°C
Bed Temp
55°C
1st: 55°C
Print Speed
200 mm/s
1st: 50 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 215°C |
| Bed Temperature | 55°C |
| Print Speed | 200 mm/s |
| Retraction Distance | 0.8 mm |
| Retraction Speed | 40 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
Notes
Bambu P1S + Prusament PLA: Prusament's tight ±0.02mm tolerance means excellent consistency on the P1S. Keep enclosure door open for PLA. Default Bambu PLA profile works well — just adjust temp to 215°C.
Troubleshooting
Stringing: Drop to 210°C. Layer separation: Bump to 220°C or slow to 150mm/s. First layer: Prusament bonds well to textured PEI at 55°C.
Sources
Source type: Lab Tested
Where to Buy Prusament Prusament PLA 1.75mm
Prusament
Prusament PLA 1.75mm
Check price on PrusaBuy on Prusa
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Bambu Lab P1S
Prusament Prusament PLA 1.75mm on other printers
Frequently Asked Questions
What nozzle temperature should I use for Prusament Prusament PLA 1.75mm on the Bambu Lab P1S?
The recommended nozzle temperature is 215°C, with a first layer temperature of 220°C. This is based on a confidence score of 95%.
What bed temperature should I use for PLA on the Bambu Lab P1S?
Set your bed temperature to 55°C, with 55°C for the first layer.
What print speed should I use for Prusament Prusament PLA 1.75mm?
The recommended print speed is 200 mm/s, with a slower first layer speed of 50 mm/s.
Does printing PLA on the Bambu Lab P1S require an enclosure?
No, an enclosure is not strictly required for printing PLA on the Bambu Lab P1S, though it can help in cold environments.
What retraction settings should I use for Prusament Prusament PLA 1.75mm on the Bambu Lab P1S?
Use a retraction distance of 0.8 mm at 40 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PLA on the Bambu Lab P1S?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.