TPU88% confidence
Best Settings for Overture Overture TPU - Black on Bambu Lab X1 Carbon
Nozzle 230°C · Bed 40°C · 30 mm/s
Bambu Lab X1 Carbon Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 100°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 256×256×256 mm
- Enclosure
- Enclosed
- Release Year
- 2022
Overture Overture TPU - Black Specs
- Material
- TPU
- Nozzle Temp Range
- 210°C – 230°C
- Bed Temp Range
- 30°C – 60°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture TPU 95A — flexible filament for rubber-like parts. Shore 95A hardness. Best with direct-drive extruders at slow speeds (20–30mm/s). 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
88% confidenceSource: Lab TestedDry Filament First
Nozzle Temp
230°C
Bed Temp
40°C
Print Speed
30 mm/s
1st: 20 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 230°C |
| Bed Temperature | 40°C |
| Print Speed | 30 mm/s |
| Retraction Distance | 0.5 mm |
| Retraction Speed | 20 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
| Filament Drying | Yes — 50°C for 6h |
Dry your filament before printing: 50°C for 6 hours. Moisture causes popping, stringing, and poor layer adhesion.
Notes
X1C + TPU: Print at 25–35 mm/s max. X1C's direct drive handles TPU well. Minimal retraction to avoid jams. Dry TPU before use — hygroscopic.
Troubleshooting
Jamming: Reduce to 20 mm/s, retraction to 0.3mm. Stringing: Increase temp to 235°C, coast at end. Underextrusion: Must dry filament.
Sources
Source type: Lab Tested
Where to Buy Overture Overture TPU - Black
Overture
Overture TPU - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Bambu Lab X1 Carbon
Overture Overture TPU - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture TPU - Black on the Bambu Lab X1 Carbon?
The recommended nozzle temperature is 230°C. This is based on a confidence score of 88%.
What bed temperature should I use for TPU on the Bambu Lab X1 Carbon?
Set your bed temperature to 40°C.
What print speed should I use for Overture Overture TPU - Black?
The recommended print speed is 30 mm/s, with a slower first layer speed of 20 mm/s.
Does printing TPU on the Bambu Lab X1 Carbon require an enclosure?
No, an enclosure is not strictly required for printing TPU on the Bambu Lab X1 Carbon, though it can help in cold environments.
Do I need to dry Overture Overture TPU - Black before printing?
Yes, dry this filament at 50°C for 6 hours before printing. Moisture causes stringing, popping, and poor layer adhesion.
What retraction settings should I use for Overture Overture TPU - Black on the Bambu Lab X1 Carbon?
Use a retraction distance of 0.5 mm at 20 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for TPU on the Bambu Lab X1 Carbon?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.