TPU87% confidence
Best Settings for Overture Overture TPU - Black on Prusa MK4S
Nozzle 235°C · Bed 50°C · 25 mm/s
Prusa MK4S Specs
- Max Nozzle Temp
- 290°C
- Max Bed Temp
- 120°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 250×210×220 mm
- Enclosure
- Recommended
- Release Year
- 2024
Overture Overture TPU - Black Specs
- Material
- TPU
- Nozzle Temp Range
- 210°C – 230°C
- Bed Temp Range
- 30°C – 60°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture TPU 95A — flexible filament for rubber-like parts. Shore 95A hardness. Best with direct-drive extruders at slow speeds (20–30mm/s). 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
87% confidenceSource: CommunityDry Filament First
Nozzle Temp
235°C
Bed Temp
50°C
Print Speed
25 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 235°C |
| Bed Temperature | 50°C |
| Print Speed | 25 mm/s |
| Retraction Distance | 0.5 mm |
| Retraction Speed | 35 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
| Filament Drying | Yes — 50°C for 6h |
Dry your filament before printing: 50°C for 6 hours. Moisture causes popping, stringing, and poor layer adhesion.
Notes
MK4S + TPU: Same as MK4. Excellent direct drive for flexibles. Print slowly.
Where to Buy Overture Overture TPU - Black
Overture
Overture TPU - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Prusa MK4S
Overture Overture TPU - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture TPU - Black on the Prusa MK4S?
The recommended nozzle temperature is 235°C. This is based on a confidence score of 87%.
What bed temperature should I use for TPU on the Prusa MK4S?
Set your bed temperature to 50°C.
What print speed should I use for Overture Overture TPU - Black?
The recommended print speed is 25 mm/s.
Does printing TPU on the Prusa MK4S require an enclosure?
No, an enclosure is not strictly required for printing TPU on the Prusa MK4S, though it can help in cold environments.
Do I need to dry Overture Overture TPU - Black before printing?
Yes, dry this filament at 50°C for 6 hours before printing. Moisture causes stringing, popping, and poor layer adhesion.
What retraction settings should I use for Overture Overture TPU - Black on the Prusa MK4S?
Use a retraction distance of 0.5 mm at 35 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for TPU on the Prusa MK4S?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.