CF_NYLON88% confidence
Best Settings for Prusament Prusament PA11 Carbon Fiber 1.75mm on Bambu Lab X1 Carbon
Nozzle 280°C · Bed 100°C · 80 mm/s
Bambu Lab X1 Carbon Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 100°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 256×256×256 mm
- Enclosure
- Enclosed
- Release Year
- 2022
Prusament Prusament PA11 Carbon Fiber 1.75mm Specs
- Material
- CF_NYLON
- Nozzle Temp Range
- 270°C – 290°C
- Bed Temp Range
- 90°C – 110°C
- Diameter
- 1.75 mm
- Spool Weight
- 750 g
Carbon fiber reinforced Nylon PA11. Extremely stiff, dimensionally stable, and heat-resistant. Ideal for structural parts, jigs, and fixtures. Requires hardened nozzle and dry storage.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
88% confidenceSource: Lab TestedEnclosure RequiredDry Filament First
Nozzle Temp
280°C
1st: 285°C
Bed Temp
100°C
1st: 105°C
Print Speed
80 mm/s
1st: 20 mm/s
Fan Speed
0%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 280°C |
| Bed Temperature | 100°C |
| Print Speed | 80 mm/s |
| Retraction Distance | 0.8 mm |
| Retraction Speed | 35 mm/s |
| Fan Speed | 0% |
| Enclosure | Required |
| Filament Drying | Yes — 80°C for 8h |
Dry your filament before printing: 80°C for 8 hours. Moisture causes popping, stringing, and poor layer adhesion.
Notes
X1C + Prusament PA11 CF: Best consumer option for CF Nylon. Hardened nozzle required. 280°C, 100°C bed, fully enclosed. Dry overnight. X1C's AMS can handle the spool but disable AMS humidity sensor.
Sources
Source type: Lab Tested
Where to Buy Prusament Prusament PA11 Carbon Fiber 1.75mm
Prusament
Prusament PA11 Carbon Fiber 1.75mm
Check price on PrusaBuy on Prusa
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Bambu Lab X1 Carbon
Prusament Prusament PA11 Carbon Fiber 1.75mm on other printers
Frequently Asked Questions
What nozzle temperature should I use for Prusament Prusament PA11 Carbon Fiber 1.75mm on the Bambu Lab X1 Carbon?
The recommended nozzle temperature is 280°C, with a first layer temperature of 285°C. This is based on a confidence score of 88%.
What bed temperature should I use for CF_NYLON on the Bambu Lab X1 Carbon?
Set your bed temperature to 100°C, with 105°C for the first layer.
What print speed should I use for Prusament Prusament PA11 Carbon Fiber 1.75mm?
The recommended print speed is 80 mm/s, with a slower first layer speed of 20 mm/s.
Does printing CF_NYLON on the Bambu Lab X1 Carbon require an enclosure?
Yes, an enclosure is required when printing CF_NYLON on the Bambu Lab X1 Carbon to prevent warping.
Do I need to dry Prusament Prusament PA11 Carbon Fiber 1.75mm before printing?
Yes, dry this filament at 80°C for 8 hours before printing. Moisture causes stringing, popping, and poor layer adhesion.
What retraction settings should I use for Prusament Prusament PA11 Carbon Fiber 1.75mm on the Bambu Lab X1 Carbon?
Use a retraction distance of 0.8 mm at 35 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for CF_NYLON on the Bambu Lab X1 Carbon?
Set your part cooling fan to 0%. Adjust lower for materials like ABS or ASA to reduce warping.