CF_NYLON80% confidence
Best Settings for Prusament Prusament PA11 Carbon Fiber 1.75mm on Prusa MK4
Nozzle 285°C · Bed 100°C · 50 mm/s
Prusa MK4 Specs
- Max Nozzle Temp
- 290°C
- Max Bed Temp
- 120°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 250×210×220 mm
- Enclosure
- Recommended
- Release Year
- 2023
Prusament Prusament PA11 Carbon Fiber 1.75mm Specs
- Material
- CF_NYLON
- Nozzle Temp Range
- 270°C – 290°C
- Bed Temp Range
- 90°C – 110°C
- Diameter
- 1.75 mm
- Spool Weight
- 750 g
Carbon fiber reinforced Nylon PA11. Extremely stiff, dimensionally stable, and heat-resistant. Ideal for structural parts, jigs, and fixtures. Requires hardened nozzle and dry storage.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
80% confidenceSource: ManufacturerEnclosure RequiredDry Filament First
Nozzle Temp
285°C
1st: 290°C
Bed Temp
100°C
1st: 105°C
Print Speed
50 mm/s
1st: 15 mm/s
Fan Speed
0%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 285°C |
| Bed Temperature | 100°C |
| Print Speed | 50 mm/s |
| Retraction Distance | 0.8 mm |
| Retraction Speed | 35 mm/s |
| Fan Speed | 0% |
| Enclosure | Required |
| Filament Drying | Yes — 80°C for 8h |
Dry your filament before printing: 80°C for 8 hours. Moisture causes popping, stringing, and poor layer adhesion.
Notes
MK4 + Prusament PA11 CF: Requires hardened nozzle + enclosure + all-metal hotend. 285°C, 100°C bed. Print very slowly (50mm/s). PrusaSlicer has profile. Most demanding Prusament material.
Sources
Source type: Manufacturer
Where to Buy Prusament Prusament PA11 Carbon Fiber 1.75mm
Prusament
Prusament PA11 Carbon Fiber 1.75mm
Check price on PrusaBuy on Prusa
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Prusa MK4
Prusament Prusament PA11 Carbon Fiber 1.75mm on other printers
Frequently Asked Questions
What nozzle temperature should I use for Prusament Prusament PA11 Carbon Fiber 1.75mm on the Prusa MK4?
The recommended nozzle temperature is 285°C, with a first layer temperature of 290°C. This is based on a confidence score of 80%.
What bed temperature should I use for CF_NYLON on the Prusa MK4?
Set your bed temperature to 100°C, with 105°C for the first layer.
What print speed should I use for Prusament Prusament PA11 Carbon Fiber 1.75mm?
The recommended print speed is 50 mm/s, with a slower first layer speed of 15 mm/s.
Does printing CF_NYLON on the Prusa MK4 require an enclosure?
Yes, an enclosure is required when printing CF_NYLON on the Prusa MK4 to prevent warping.
Do I need to dry Prusament Prusament PA11 Carbon Fiber 1.75mm before printing?
Yes, dry this filament at 80°C for 8 hours before printing. Moisture causes stringing, popping, and poor layer adhesion.
What retraction settings should I use for Prusament Prusament PA11 Carbon Fiber 1.75mm on the Prusa MK4?
Use a retraction distance of 0.8 mm at 35 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for CF_NYLON on the Prusa MK4?
Set your part cooling fan to 0%. Adjust lower for materials like ABS or ASA to reduce warping.