PETG78% confidence
Best Settings for Overture Overture PETG - Black on Creality Ender 3 V3 SE
Nozzle 240°C · Bed 80°C · 70 mm/s
Creality Ender 3 V3 SE Specs
- Max Nozzle Temp
- 260°C
- Max Bed Temp
- 100°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 220×220×250 mm
- Enclosure
- Open frame
- Release Year
- 2023
Overture Overture PETG - Black Specs
- Material
- PETG
- Nozzle Temp Range
- 230°C – 250°C
- Bed Temp Range
- 70°C – 80°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture PETG — tough and chemical-resistant with good layer adhesion. Dimensional accuracy ±0.05mm. Works well on textured PEI. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
78% confidenceSource: Community
Nozzle Temp
240°C
Bed Temp
80°C
Print Speed
70 mm/s
Fan Speed
50%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 240°C |
| Bed Temperature | 80°C |
| Print Speed | 70 mm/s |
| Retraction Distance | 0.6 mm |
| Retraction Speed | 40 mm/s |
| Fan Speed | 50% |
| Enclosure | Optional |
Notes
V3 SE + PETG: 260°C cap is marginal for PETG at 240°C — close to limit. Run at 240°C max. Reduce speed for quality.
Troubleshooting
Temp warnings: 240°C is near the 260°C firmware cap; don't exceed 245°C. Stringing: Lower to 235°C.
Where to Buy Overture Overture PETG - Black
Overture
Overture PETG - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Creality Ender 3 V3 SE
Overture Overture PETG - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture PETG - Black on the Creality Ender 3 V3 SE?
The recommended nozzle temperature is 240°C. This is based on a confidence score of 78%.
What bed temperature should I use for PETG on the Creality Ender 3 V3 SE?
Set your bed temperature to 80°C.
What print speed should I use for Overture Overture PETG - Black?
The recommended print speed is 70 mm/s.
Does printing PETG on the Creality Ender 3 V3 SE require an enclosure?
No, an enclosure is not strictly required for printing PETG on the Creality Ender 3 V3 SE, though it can help in cold environments.
What retraction settings should I use for Overture Overture PETG - Black on the Creality Ender 3 V3 SE?
Use a retraction distance of 0.6 mm at 40 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PETG on the Creality Ender 3 V3 SE?
Set your part cooling fan to 50%. Adjust lower for materials like ABS or ASA to reduce warping.