PETG75% confidence
Best Settings for Overture Overture PETG - Black on Flashforge Adventurer 5M
Nozzle 240°C · Bed 80°C · 100 mm/s
Flashforge Adventurer 5M Specs
- Max Nozzle Temp
- 280°C
- Max Bed Temp
- 110°C
- Hotend Type
- PTFE-lined
- Default Nozzle
- 0.4 mm
- Build Volume
- 220×220×220 mm
- Enclosure
- Open frame
- Release Year
- 2023
Overture Overture PETG - Black Specs
- Material
- PETG
- Nozzle Temp Range
- 230°C – 250°C
- Bed Temp Range
- 70°C – 80°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture PETG — tough and chemical-resistant with good layer adhesion. Dimensional accuracy ±0.05mm. Works well on textured PEI. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
75% confidenceSource: Community
Nozzle Temp
240°C
Bed Temp
80°C
Print Speed
100 mm/s
Fan Speed
40%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 240°C |
| Bed Temperature | 80°C |
| Print Speed | 100 mm/s |
| Retraction Distance | 1 mm |
| Retraction Speed | 35 mm/s |
| Fan Speed | 40% |
| Enclosure | Optional |
Notes
Adventurer 5M + PETG: PTFE-lined at 240°C is marginal — keep at 240°C max. Fan at 40%.
Troubleshooting
PTFE degradation risk: Don't exceed 240°C with this printer. Stringing: Lower to 235°C.
Where to Buy Overture Overture PETG - Black
Overture
Overture PETG - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Flashforge Adventurer 5M
Overture Overture PETG - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture PETG - Black on the Flashforge Adventurer 5M?
The recommended nozzle temperature is 240°C. This is based on a confidence score of 75%.
What bed temperature should I use for PETG on the Flashforge Adventurer 5M?
Set your bed temperature to 80°C.
What print speed should I use for Overture Overture PETG - Black?
The recommended print speed is 100 mm/s.
Does printing PETG on the Flashforge Adventurer 5M require an enclosure?
No, an enclosure is not strictly required for printing PETG on the Flashforge Adventurer 5M, though it can help in cold environments.
What retraction settings should I use for Overture Overture PETG - Black on the Flashforge Adventurer 5M?
Use a retraction distance of 1 mm at 35 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PETG on the Flashforge Adventurer 5M?
Set your part cooling fan to 40%. Adjust lower for materials like ABS or ASA to reduce warping.