PETG87% confidence
Best Settings for Overture Overture PETG - Black on Prusa XL
Nozzle 240°C · Bed 85°C · 100 mm/s
Prusa XL Specs
- Max Nozzle Temp
- 300°C
- Max Bed Temp
- 120°C
- Hotend Type
- all-metal
- Default Nozzle
- 0.4 mm
- Build Volume
- 360×360×360 mm
- Enclosure
- Recommended
- Release Year
- 2023
Overture Overture PETG - Black Specs
- Material
- PETG
- Nozzle Temp Range
- 230°C – 250°C
- Bed Temp Range
- 70°C – 80°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture PETG — tough and chemical-resistant with good layer adhesion. Dimensional accuracy ±0.05mm. Works well on textured PEI. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
87% confidenceSource: Community
Nozzle Temp
240°C
Bed Temp
85°C
Print Speed
100 mm/s
Fan Speed
30%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 240°C |
| Bed Temperature | 85°C |
| Print Speed | 100 mm/s |
| Retraction Distance | 0.4 mm |
| Retraction Speed | 45 mm/s |
| Fan Speed | 30% |
| Enclosure | Optional |
Notes
Prusa XL + PETG: 120°C bed provides headroom. Satin PEI recommended. CoreXY means consistent speeds on large prints.
Where to Buy Overture Overture PETG - Black
Overture
Overture PETG - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Prusa XL
Overture Overture PETG - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture PETG - Black on the Prusa XL?
The recommended nozzle temperature is 240°C. This is based on a confidence score of 87%.
What bed temperature should I use for PETG on the Prusa XL?
Set your bed temperature to 85°C.
What print speed should I use for Overture Overture PETG - Black?
The recommended print speed is 100 mm/s.
Does printing PETG on the Prusa XL require an enclosure?
No, an enclosure is not strictly required for printing PETG on the Prusa XL, though it can help in cold environments.
What retraction settings should I use for Overture Overture PETG - Black on the Prusa XL?
Use a retraction distance of 0.4 mm at 45 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PETG on the Prusa XL?
Set your part cooling fan to 30%. Adjust lower for materials like ABS or ASA to reduce warping.