PLA_PLUS85% confidence
Best Settings for eSun eSun PLA+ - Black on Prusa Mini+
Nozzle 220°C · Bed 65°C · 70 mm/s
Prusa Mini+ Specs
- Max Nozzle Temp
- 280°C
- Max Bed Temp
- 100°C
- Hotend Type
- PTFE-lined
- Default Nozzle
- 0.4 mm
- Build Volume
- 180×180×180 mm
- Enclosure
- Open frame
- Release Year
- 2021
eSun eSun PLA+ - Black Specs
- Material
- PLA_PLUS
- Nozzle Temp Range
- 205°C – 225°C
- Bed Temp Range
- 60°C – 80°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
eSun PLA+ (PLA Pro) — enhanced PLA with better toughness and layer adhesion than standard PLA. Less brittle, slightly higher print temps. 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
85% confidenceSource: Community
Nozzle Temp
220°C
Bed Temp
65°C
Print Speed
70 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 220°C |
| Bed Temperature | 65°C |
| Print Speed | 70 mm/s |
| Retraction Distance | 3.5 mm |
| Retraction Speed | 50 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
Notes
Mini+ + PLA+: Works well. Slightly slower than standard PLA. Bowden retraction 3.5mm.
Where to Buy eSun eSun PLA+ - Black
eSun
eSun PLA+ - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Prusa Mini+
eSun eSun PLA+ - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for eSun eSun PLA+ - Black on the Prusa Mini+?
The recommended nozzle temperature is 220°C. This is based on a confidence score of 85%.
What bed temperature should I use for PLA_PLUS on the Prusa Mini+?
Set your bed temperature to 65°C.
What print speed should I use for eSun eSun PLA+ - Black?
The recommended print speed is 70 mm/s.
Does printing PLA_PLUS on the Prusa Mini+ require an enclosure?
No, an enclosure is not strictly required for printing PLA_PLUS on the Prusa Mini+, though it can help in cold environments.
What retraction settings should I use for eSun eSun PLA+ - Black on the Prusa Mini+?
Use a retraction distance of 3.5 mm at 50 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for PLA_PLUS on the Prusa Mini+?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.