TPU65% confidence
Best Settings for Overture Overture TPU - Black on Prusa Mini+
Nozzle 230°C · Bed 50°C · 15 mm/s
Prusa Mini+ Specs
- Max Nozzle Temp
- 280°C
- Max Bed Temp
- 100°C
- Hotend Type
- PTFE-lined
- Default Nozzle
- 0.4 mm
- Build Volume
- 180×180×180 mm
- Enclosure
- Open frame
- Release Year
- 2021
Overture Overture TPU - Black Specs
- Material
- TPU
- Nozzle Temp Range
- 210°C – 230°C
- Bed Temp Range
- 30°C – 60°C
- Diameter
- 1.75 mm
- Spool Weight
- 1000 g
- Color
- Black
Overture TPU 95A — flexible filament for rubber-like parts. Shore 95A hardness. Best with direct-drive extruders at slow speeds (20–30mm/s). 1.75mm, 1kg spool.
Print Settings
0.4 mm nozzle· 0.2 mm layer height
65% confidenceSource: CommunityDry Filament First
Nozzle Temp
230°C
Bed Temp
50°C
Print Speed
15 mm/s
Fan Speed
100%
| Parameter | Value |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Layer Height | 0.2 mm |
| Nozzle Temperature | 230°C |
| Bed Temperature | 50°C |
| Print Speed | 15 mm/s |
| Retraction Distance | 0 mm |
| Retraction Speed | 30 mm/s |
| Fan Speed | 100% |
| Enclosure | Optional |
| Filament Drying | Yes — 50°C for 6h |
Dry your filament before printing: 50°C for 6 hours. Moisture causes popping, stringing, and poor layer adhesion.
Notes
Mini+ + TPU: Bowden + TPU is challenging. Print very slowly (10–20 mm/s), disable retraction entirely. Soft TPU (80A) is not practical; 95A Shore is the minimum.
Where to Buy Overture Overture TPU - Black
Overture
Overture TPU - Black
Check price on AmazonBuy on Amazon
* Affiliate links — we may earn a commission at no extra cost to you. Learn more.
Related Settings
Other filaments on the Prusa Mini+
Overture Overture TPU - Black on other printers
Frequently Asked Questions
What nozzle temperature should I use for Overture Overture TPU - Black on the Prusa Mini+?
The recommended nozzle temperature is 230°C. This is based on a confidence score of 65%.
What bed temperature should I use for TPU on the Prusa Mini+?
Set your bed temperature to 50°C.
What print speed should I use for Overture Overture TPU - Black?
The recommended print speed is 15 mm/s.
Does printing TPU on the Prusa Mini+ require an enclosure?
No, an enclosure is not strictly required for printing TPU on the Prusa Mini+, though it can help in cold environments.
Do I need to dry Overture Overture TPU - Black before printing?
Yes, dry this filament at 50°C for 6 hours before printing. Moisture causes stringing, popping, and poor layer adhesion.
What retraction settings should I use for Overture Overture TPU - Black on the Prusa Mini+?
Use a retraction distance of 0 mm at 30 mm/s. These settings help reduce stringing and oozing during travel moves.
What fan speed should I use for TPU on the Prusa Mini+?
Set your part cooling fan to 100%. Adjust lower for materials like ABS or ASA to reduce warping.